Display systems · 14 models

Portable display & trade-show lightboxes

SEG frames from 32 mm to 120 mm, foldable stand lightboxes, modular booth construction, roll-up banners and the TPE edge strip that holds the fabric — all extruded, cut and assembled at one factory in Hangzhou, then crated for export.

No matching model. Try a shorter word such as “lightbox”, “stand” or “frame”.

01 SEG frame

100MM Single-Sided SEG Frame with 1.5W LED Edge

The deepest standard section we extrude, used where the light has to travel further behind the graphic. The 1.5W LED strip runs inside the 100mm profile, so the panel stays evenly lit edge to edge without a bright band at the border. Single-sided, wall-mounted or built into a freestanding frame. The frame goes together with corner brackets and a screwdriver, then the SEG fabric is pressed into the groove.

100mm profile depth, single-sided
1.5W/m LED edge strip
Corner brackets + a screwdriver

Video

02 Trade-show booth

Exhibition Standard Booth Construction

Shell-scheme booths assembled from the same aluminum profiles sold on this page. Panels arrive pre-wired, frames join together on site with corner brackets and a screwdriver, and the walls double as backlit surfaces. The system is modular, so the same stock rebuilds a 3 × 3m booth one week and a run of wall panels the next, and it packs back into flight cases between shows.

Modular panels, reused show after show
Pre-wired LED, one power feed per booth
Packs into flight cases

Video

03 SEG frame

120MM Aluminum Profile with 3.5W LED Strip

The widest standard profile in the range, specified where a large panel or a double-sided lightbox needs more light behind it. The 3.5W strip sits along the frame edge and the extra depth keeps the glow even across panels taller than two metres. It is the section most often requested for mall, airport and exhibition-hall walls.

120mm depth, single or double sided
3.5W LED strip per edge
Even output on tall panels
Corner brackets + a screwdriver

Video

04 Portable stand

3 × 2M Portable Stand Lightbox

A 3 × 2m freestanding lightbox that folds down into a carry bag. The frame assembles with corner brackets and a screwdriver, the graphic is SEG fabric, and the unit is light enough for one person to raise without help. Built for exhibition halls, hotel lobbies and product launches where the back wall has to travel by van or by air.

3 × 2m graphic area
Corner brackets + a screwdriver
Folds into a carry bag

Video

05 SEG frame

60MM SEG Backlit Lightbox

The slimmest backlit frame we make. At 60mm the profile reads more like a picture frame than a lightbox, which is why it is usually chosen for retail walls, menu boards and interior signage rather than exhibition floors. Backlit, SEG fabric, mounted flat to a wall or hung from a ceiling rail.

60mm slim profile
Backlit, even edge lighting
Wall mount or ceiling rail
Corner brackets + a screwdriver

Video

06 Roll-up banner

Door Frame Roll-Up Banner

A roll-up banner presented inside a rigid door-frame surround, so the graphic reads as a framed panel instead of a freestanding banner. The cassette stays hidden in the base, the graphic retracts when the space closes, and a new print drops in without changing the frame. Common at receptions, entries and hotel lobbies.

Rigid surround, retractable graphic
Print change without a new frame
Reception and entry use
Corner brackets + a screwdriver

Video

07 Signage

Guide Sign Frame Lightbox

Wayfinding and directory signs with a lit face. The frame takes a printed or fabric panel on one side, the LED sits behind it, and the unit mounts to a wall, a ceiling grid or a floor stand depending on the location. Used in airports, hospitals, malls and office lobbies where a sign has to stay readable in low light.

Lit face for low-light spaces
Wall, ceiling or floor mount
Printed or SEG fabric panel
Corner brackets + a screwdriver

Video

08 Lightbox furniture

Portable Lightbox Reception Table

A reception desk with a backlit front panel. The counter is built from the same aluminum profiles as the lightboxes, the front face is SEG fabric, and the unit folds for transport. Brands use it where the welcome desk is also the first brand impression — showrooms, pop-ups and exhibition entrances.

Backlit front panel
Folds flat for transport
Counter and lightbox in one
Corner brackets + a screwdriver

Video

09 Portable stand

80 × 180CM Portable Fabric Display Stand

The most requested single-person stand size. 80 × 180cm covers a full-height graphic without needing a wide floor footprint, so it fits corridors, small booths and retail aisles. The frame assembles with corner brackets and a screwdriver, the fabric is SEG, and the stand goes up in a few minutes and travels in one bag.

80 × 180cm graphic area
Full height, narrow footprint
One bag, one person

Video

10 Portable stand

1 × 2M Tool-Free Stand Fabric Lightbox

A one-metre wide freestanding lightbox assembled entirely by hand. No screws, no hex keys, no tools at all — the sections push together and lock, the fabric is pressed into the groove, and the unit stands on its own base. Popular for retail displays and exhibition stands that are built and taken down by the same small team.

1 × 2m, assembled by hand
No screws or tools
Self-standing base

Video

11 Wall panel

1 × 2M Tool-Free Wall Fabric Lightbox

The wall-mounted version of the 1 × 2m tool-free frame. Same push-fit assembly and same SEG fabric, but the profile is fixed flat against a wall or partition, which keeps the floor clear. Specified for retail interiors, office branding and showroom walls where a lit panel has to sit flush.

1 × 2m, wall fixed
Push-fit, no tools
Flush mount, floor stays clear

Video

12 Picture-frame profile

32MM Picture Frame Profile

A 32mm aluminum section that behaves like a picture frame rather than a lightbox. It holds a thin panel or a stretched print and sits flat against the wall, so it suits galleries, office art walls and interior graphics where backlighting is not wanted. Cut to length, mitred corners, standard hanging hardware.

32mm face, picture-frame look
Cut to length, mitred corners
Non-lit, flat wall mount
Corner brackets + a screwdriver

Video

13 Picture-frame profile

Pull-Out Photo Frame Profile

A frame that lets the print be pulled out and replaced without taking the profile off the wall. The panel slides out on the front edge, so a gallery or a showroom can rotate artwork between seasons while the frame stays fixed. Same 32mm face as the standard picture frame profile.

Print slides out for replacement
Frame stays on the wall
Rotate artwork between seasons
Corner brackets + a screwdriver

Video

14 SEG consumable

TPE Flexible Edge Strip

The soft edge strip that holds SEG fabric in place. TPE rather than PVC, so it stays flexible across a wide temperature range, returns to shape after compression, and does not harden in cold storage or transport. Low-VOC, REACH and ROHS 2.0 compliant, supplied in coils and cut to the frame perimeter.

TPE, stays flexible when cold
Low-VOC, REACH / ROHS 2.0
Coils, cut to perimeter

Video

Which one fits

Match the job, not the catalogue

Travelling to a show, one person, must fold into a bag Portable stand lightbox 3 × 2 m or 1 × 2 m, tool-free frame, carry bag

A whole booth, reused show after show Standard booth construction Modular panels, pre-wired, packs into flight cases

A wall or hanging panel that has to glow edge to edge SEG frame, 60 / 100 / 120 mm Backlit, single or double sided, 1.5–3.5 W strip per edge

Artwork that changes every season, frame stays put Pull-out picture-frame profile Print slides out of the front edge, 32 mm face

A framed print at reception or an entryway Door-frame roll-up banner Rigid surround, retractable graphic, cassette hidden in the base

Next step

Need a price on a frame, a booth or a full stand?

Send the booth size, the panel size or the drawing. Price, MOQ and lead time come back within 24 hours.

Start an inquiry See 500+ stock profiles